QUESTIONS ASKED IN INTERVIEWS FOR HSE DEPARTMENT
Responsibilities Safety Officer
1. What are the responsibilities of a Safety Officer?
2. What is the purpose of Hazard Identification?
3. What is IDLH?
4. What is walkthrough?
5. What will you check in walkthrough?
6. What is Colour Coding?
7. Suppose you go on site and crane lifting activity is about to start or in progress, so what will you check there?
8. If there is an emergency on site, what will be your actions or what will you do?
Hot work
1. What is hot work?
2. What are hot work requirements?
3. Who is fire watcher?
4. How much time a fire watchman should remain at site after finishing the hot work activity?
5. What should be the maximum distance of Fire Extinguisher from a hot work activity?
6. 5 responsibilities of fire watchman?
Scaffolding
1. What is scaffolding?
2. Types of scaffolding?
3. Parts of scaffolding?
4. What are the hazards of scaffolding?
5. Who can erect the scaffolding?
6. Which permit is required for scaffolding erection?
7. Who can inspect scaffolding?
8. What are the types of scaffolding Tags?
9. What is the use of Red Tag?
10. What is the use Yellow Tag?
11. What is the use Green Tag?
12. What is Toe board?
13. What is the maximum distance allowed between the planks of Scaffolding?
14. What should be the angle of the Ladder placed on Scaffolding?
15. Ladder should be extended _ meter above the landing platform?
16. What is Bracket Scaffolding, and where it is used?
Excavation
1. What is Excavation?
2. What are the hazards of Excavation?
3. Which permit is required for Excavation activity?
4. What are the requirements for Excavation activity?
5. What is ECC?
6. Excavated soil should be placed _ meter away from the edge of Excavation.
7. No mechanical excavation is allowed within _ meter of any underground service.
8. Equipment and other heavy objects must be kept at least¬¬¬_ meters away from the edge of the excavation.
Compressed Gas Cylinders
1. What is the Safety device attached with Compressed Gas Cylinders?
2. What are the colours of Compressed Gas Cylinders?
3. What is the colour of Oxygen Hose?
4. What is the colour of Acetylene Hose?
5. What should be the minimum distance between Oxygen gas cylinders and Fuel gas Cylinders?
6. Why Compressed Gas Cylinders are stored only in vertical position?
7. What are the requirements for transporting Compressed Gas Cylinders?
8. What is PPM?
Electric Safety
1. What is LOTO?
2. What is the use of LOTO?
3. What is GFCI?
4. What is the use of GFCI?
5. What is ELCB?
6. What is the use of ELCB?
7. What is Dead man Switch and where it is used?
8. What are the Safety devices attached with Portable Grinders?
9. What are the electrical hazards?
10. What are the main types of electrical injuries?
11. What is the difference between GFCI and ELCB?
12. What is thermostat?
13. What is thermometer?
14. What Is Anemometer?
15. What Is Cathoding?
Confined Space
1. What is confined Space?
2. What are the requirements before entry confined space?
3. Who can conduct the gas test?
4. Who can enter a Confined Space?
5. How often we should do gas test?
6. Some examples of hazardous gases in confined space?
7. Some examples of flammable gases?
8. What is requirement of oxygen in a confined space?
9. What is LEL?
10. What is UEL?
11. What is oxygen enrich atmosphere?
12. What is oxygen deficient atmosphere?
13. What is SCBA?
14. What is shoring bag?
Lifting
1. What is lifting?
2. Types of crane lifting?
3. What are the requirements of lifting activities?
4. What is lift plan?
5. What is engineering lift plan?
6. What is load chart?
7. What information we can get from load chart?
8. What is the percentage allowed for lifting according to the capacity of the crane?
9. What is SWL?
10. What is LMI?
11. What is the maximum allowable wind speed for lifting activities?
12. Who is authorized to signal the crane operator?
13. Who is rigger?
14. Types of rigger?
